TPS3514DR Overview
This power management consists of 14 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 3 channels that can be found. In this PMIC, you can find 14-SOIC (0.154, 3.90mm Width) functions for your reference. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 260 for the package during reflow. In a 5V supply voltage, the power management conducts. When 3 is applied to the power ic, it conducts. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 14 pins on the board. There are 14 pins on the power managment ic. Supply voltage (Vsup) should be at least 4.5V for this power management. The maximum supply voltage (Vsup) is not to exceed 15V volts in this IC management. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 1mA. It is always advisable to use TPS3514, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 1mA.
TPS3514DR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 4.5V
1mA operating supply current
TPS3514DR Applications
There are a lot of Texas Instruments TPS3514DR Voltage Supervisors applications.
- Cloud computing
- Utility meter
- Stable power system
- Power distribution systems of CCU
- Detection of phase imbalance
- Personal computers
- Insulation fault location system
- Refrigeration
- WiFi router
- Important electronics for automotive safety
