Name: DG429DW-E3
Brand: Vishay Siliconix
SKU: DG429DW-E3
Availability: InStock

new-10%

DG429DW-E3

Manufacturer part number:DG429DW-E3

Manufacturer:Vishay Siliconix

Description:150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE DG429 18 Pins 500pA 15V 18-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:DG429DW-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	18-SOIC (0.295, 7.50mm Width)
Number of Pins	18
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	18
Resistance	150Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	470mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	15V
Base Part Number	DG429
Pin Count	18
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	20μA
Nominal Supply Current	100μA
Power Dissipation	470mW
Max Supply Current	100μA
Propagation Delay	250 ns
Turn On Delay Time	300 ns
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	7V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	11pF 20pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height	2.6mm
Length	12.45mm
Width	8mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG429DW-E3 Product Details

DG429DW-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 18-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tube. Surface Mount is where this multiplexer is located. 4:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. 18 terminations have been made so far. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. An injection of 18 pins is performed into the body of the electrical component. A SP4T switching circuit is used for these analog switches. A total of 2 circuits make up this switch device. Try searching for the analog switch ic with DG429 if you are looking for variants. This digital multiplexer has 150Ohm internal resistance. Please refer to the datasheets for 18 pins functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 13V. The analogue multiplexer could operate on 20μA current. The analogue multiplexer may be damaged if voltage is greater than 100μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. For dual power supplies, a voltage of at least 7V should be attached. The electrical component supports 8 inputs.