Name: ADG849YKSZ-REEL
Brand: Hotenda
SKU: ADG849YKSZ-REEL
Price: 2.31000 USD
Availability: InStock

new-10%

ADG849YKSZ-REEL

Manufacturer part number:ADG849YKSZ-REEL

Manufacturer:Hotenda

Description:15ns, 13ns SPDT 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG849 6 Pins 10pA Typ 5V 6-TSSOP, SC-88, SOT-363

Case Package:SOT-23

Datasheet:ADG849YKSZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Surface Mount	YES
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	600mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG849
Pin Count	6
Number of Outputs	2
Qualification Status	Not Qualified
Operating Supply Voltage	5.5V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	100kHz
Operating Supply Current	1nA
Power Dissipation	5.5nW
Max Supply Current	1nA
Turn On Delay Time	15 ns
Supply Type	Single
Bandwidth	38MHz
Turn-Off Delay Time	13 ns
On-State Resistance (Max)	600mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	10pA Typ
Channel Capacitance (CS(off), CD(off))	52pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	15ns, 13ns
Insertion Loss (dB)	0.04 dB
Charge Injection	50pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.8V~5.5V
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG849YKSZ-REEL Product Details

ADG849YKSZ-REEL Overview

Presented in 6-TSSOP, SC-88, SOT-363, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 6 terminations. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 6 pins. SPDT switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with ADG849. This digital multiplexer has 600mOhm internal resistance. Please refer to the datasheets for 6 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. 1.8V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 1nA. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 1nA. There is a voltage range of 5.5V operating voltages for the electrical part. The transfer of data can be performed over 38MHz bandwidths. There are 2 outputs on the analogue multiplexer.