Name: ADG774BRZ-REEL7
Brand: Hotenda
SKU: ADG774BRZ-REEL7
Price: 6.46000 USD
Availability: InStock

new

ADG774BRZ-REEL7

Manufacturer part number:ADG774BRZ-REEL7

Manufacturer:Hotenda

Description:15ns, 8ns SPDT 2.2Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG774 16 Pins 500pA 3V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG774BRZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	2.2Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATE AT 5V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG774
Pin Count	16
Power Supplies	3/5V
Number of Channels	2
Interface	Parallel
Number of Circuits	4
Max Supply Voltage	5.5V
Min Supply Voltage	0V
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	DPST
Logic Function	Demultiplexer, Multiplexer
Data Rate	16 Mbps
Number of Inputs	8
Supply Type	Single
Bandwidth	240MHz
On-State Resistance (Max)	2.2Ohm Typ
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	10pF 20pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	15ns, 8ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	150m Ω
Crosstalk	-75dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	21ns
Switch-off Time-Max	11ns
Voltage - Supply, Single (V+)	3V~5V
Signal Current-Max	0.1A
Height Seated (Max)	1.75mm
Length	9.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG774BRZ-REEL7 Product Details

ADG774BRZ-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~125°C TA. Totally, there are 16 terminations. A 2 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. Based on SPDT switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 4. ADG774 can be used to search for analog multiplexer variants. There is 2.2Ohm internal resistance in this digital multiplexer. Datasheets for functions of 16 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. 0V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 1nA current. A voltage of 3V~5V is required for this switch device, which drains from a single voltage source. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to operate 8 inputs. 240MHz bandwidths enable data to be transferred. Additional features of the electronic component include: ALSO OPERATE AT 5V SUPPLY.