Name: ADG811YCPZ-REEL
Brand: Hotenda
SKU: ADG811YCPZ-REEL
Availability: InStock

new-10%

ADG811YCPZ-REEL

Manufacturer part number:ADG811YCPZ-REEL

Manufacturer:Hotenda

Description:25ns, 5ns SPST - NC 650mOhm QUAD Analog Switches BREAK-BEFORE-MAKE ADG811 16 Pins 1nA 2.5V 16-VFQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG811YCPZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	650mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	14.4μW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG811
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	1.8/3.3V
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Power Dissipation	14.4μW
Max Supply Current	4μA
Turn On Delay Time	25 ns
Number of Inputs	4
Supply Type	Single
Turn-Off Delay Time	5 ns
-3db Bandwidth	90MHz
On-State Resistance (Max)	650mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	30pF 35pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	25ns, 5ns
Charge Injection	30pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	30ns
Switch-off Time-Max	8ns
Voltage - Supply, Single (V+)	1.65V~3.6V
Normal Position	NC
Height Seated (Max)	1mm
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG811YCPZ-REEL Product Details

ADG811YCPZ-REEL Overview

The electrical component comes in 16-VFQFN Exposed Pad, CSP packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Look for analog switch ic variants by searching with ADG811. A 650mOhm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.65V as the lowest voltage for the electrical part. Analogue multiplexers require a 1.65V~3.6V voltage to drain from a single voltage supply. A voltage higher than 4μA may cause damage to the switch multiplexer. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Among the inputs that can be operated are the 4 inputs.