ADG802BRTZ-500RL7 Overview
This electronic part is conveniently packaged in SOT-23-6, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 6 terminations. A 1 channel electronic part produces high-quality output. A 3V voltage supply should turn on and run the electronic component. An injection of 6 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for ADG802 variants of the analog switch ic. Analog switches have 300mOhm internal resistance. To find out what the 6 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Single supply type are cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. In 12MHz-bandwidths, data can be transferred.
ADG802BRTZ-500RL7 Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 12MHz
ADG802BRTZ-500RL7 Applications
There are a lot of Analog Devices Inc.
ADG802BRTZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
