ADG787BRMZ Overview
Shipping overseas is convenient due to the electrical component's packing in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 10 terminations have been recorded. A high-quality output is provided by the electrical component's 2 channels. It is safe to turn on and run the electronic component with a 2.7V voltage supply. Into the electrical component body are injected 10 pins. Unlike digital switches, these are based on SPDT switching circuits. Try searching for the analog switch ic with ADG787 if you are looking for variants. It has an internal resistance of 3Ohm. For functions related to 10 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 5.5V should not normally be supplied to the switches. The lowest voltage fed to the electronic component should be 1.8V. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 1μA. 5.5V operating voltages are supported by the electronic component. The transfer of data can be performed over 145MHz bandwidths. Resistivity from Drain to Source is 2.5Ohm for this electronic part. A analog switch ics with 4 outputs is included.
ADG787BRMZ Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 145MHz
Drain-to-Source resistance: 2.5Ohm
ADG787BRMZ Applications
There are a lot of Analog Devices Inc. ADG787BRMZ Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Remote wireless modules
- Wireless Local Loop
- Video signal routing
- Switching Systems
- Audio signal routing
- SONET
- Sample hold systems
- Cellular phones
