Name: ADG721BRMZ-REEL7
Brand: Hotenda
SKU: ADG721BRMZ-REEL7
Price: 2.69000 USD
Availability: InStock

new-10%

ADG721BRMZ-REEL7

Manufacturer part number:ADG721BRMZ-REEL7

Manufacturer:Hotenda

Description:14ns, 6ns (Typ) SPST - NO 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG721 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG721BRMZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	4Ohm
Additional Feature	ALSO OPEARTES AT 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG721
Pin Count	8
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	14 ns
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	4Ohm
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	7pF 7pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	14ns, 6ns (Typ)
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-97dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	11ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Normal Position	NO
Height Seated (Max)	1.1mm
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG721BRMZ-REEL7 Product Details

ADG721BRMZ-REEL7 Overview

This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. Totally, there are 8 terminations. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. As part of its design, the 8 series is equipped with this electronic component. Multiplexers built on a SPST - NO switching circuit are built. Try searching for ADG721 variants of the analog switch ic. There is 4Ohm internal resistance in this digital multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. 1.8V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1nA current would be sufficient. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. Putting voltage greater than 1μA on the multiplexer may cause damage. This switch operates within the bandwidth of 200MHz. Don't miss this electronic component's additional features, such as: ALSO OPEARTES AT 5 V SUPPLY.