Name: ADG774BRZ
Brand: Hotenda
SKU: ADG774BRZ
Price: 6.46000 USD
Availability: InStock

new-10%

ADG774BRZ

Manufacturer part number:ADG774BRZ

Manufacturer:Hotenda

Description:15ns, 8ns SPDT 2.2Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG774 16 Pins 500pA 3V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG774BRZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	2.2Ohm
Additional Feature	ALSO OPERATE AT 5V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG774
Pin Count	16
Number of Channels	2
Interface	Parallel
Number of Circuits	4
Max Supply Voltage	5V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	DPST
Turn On Delay Time	21 ns
Data Rate	16 Mbps
Number of Inputs	8
Bandwidth	240MHz
Turn-Off Delay Time	11 ns
On-State Resistance (Max)	2.2Ohm Typ
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	10pF 20pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	15ns, 8ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	150m Ω
Crosstalk	-75dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	3V~5V
Drain to Source Resistance	2.2Ohm
Signal Current-Max	0.1A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG774BRZ Product Details

ADG774BRZ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 16. As a result of its 2 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. Use ADG774 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 2.2Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5V. A low voltage of 3V should be applied to the electronic component. Using only a single voltage supply, this analog switch requires 3V~5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. A 8 input needs to be operated. There are various bandwidths available for data transfer. Don't miss this electronic component's additional features, such as: ALSO OPERATE AT 5V SUPPLY. There is 2.2Ohm resistance between the Drain and Source on this part.