FSA5157L6X Overview
The electrical component comes in 6-UFDFN packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. In total, there have been 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. A 2.3V voltage supply should turn on and run the electronic component. A SPDT switching circuit is used for these analog switches. FSA5157 can be used to search for analog multiplexer variants. It has an internal resistance of 360mOhm. The functions of 6 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. 1.65V should be the lowest voltage fed to the electronic component. Using only a single voltage supply, this analog switch requires 1.65V~4.3V voltage. The analogue multiplexer may be damaged if voltage is greater than 100nA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The 1 inputs need to be operated in order to work. 80MHz bandwidths enable data to be transferred. The switch device is capable of conducting in a 2-bit mode.
FSA5157L6X Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 80MHz
2-Bit
FSA5157L6X Applications
There are a lot of ON Semiconductor FSA5157L6X Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Data Acquisition Systems
- Channel Banks
- Voice over IP/DSL – Integrated Access Devices, Smart
- SDH
- Fiber to the Home
- Avionics test equipment
- Video signal routing
- Private Branch Exchange (PBX)
- Automotive applications
