ADG719SRJZ-EP-R2 Overview
The electrical component comes in SOT-23-6 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. Into the electrical component body are injected 6 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Look for analog switch ic variants by searching with ADG719. A 4Ohm internal resistance characterizes this multiplexer. The datasheets for the 6 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.8V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 1nA current. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. Among the inputs that can be operated are the 1 inputs. It is possible to transfer data over a 200MHz-bandwidth. This digital multiplexer has 2 outputs.
ADG719SRJZ-EP-R2 Features
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 200MHz
ADG719SRJZ-EP-R2 Applications
There are a lot of Analog Devices Inc.
ADG719SRJZ-EP-R2 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
