Name: IH5049CPE+
Brand: Maxim Integrated
SKU: IH5049CPE+
Price: 14.03000 USD
Availability: InStock

new

IH5049CPE+

Manufacturer part number:IH5049CPE+

Manufacturer:Maxim Integrated

Description:600ns, 300ns (Typ) SPST - NO 75Ohm Analog Switches BREAK-BEFORE-MAKE IH5049 16 Pins 100nA 15V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:IH5049CPE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2003
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	45Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	IH5049
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	5+-15V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	20V
Min Supply Voltage	4.5V
Analog IC - Other Type	DPST
Operating Supply Current	10μA
Max Supply Current	10μA
Throw Configuration	SPST
Turn On Delay Time	600 ns
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	75Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
On-state Resistance Match-Nom	8Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	600ns, 300ns (Typ)
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	8 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±4.5V~20V
Length	19.175mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

IH5049CPE+ Product Details

IH5049CPE+ Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there are 16 terminations. The electronic part delivers high-quality output through its 2 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. Circuits number 2 make up this analogue multiplexer. IH5049 can be used to search for analog multiplexer variants. There is 45Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 20V should not normally be supplied to the switches. The analog switch ic is of the Dual supply type and is cost-effective. A low voltage of 4.5V should be applied to the electronic component. This multiplexer would work with 10μA current. A digital multiplexer may suffer damage if voltage is applied above 10μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. This product is integrated with an analog integrated circuit (IC) of type DPST. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.