Name: DG509BEQ-T1-E3
Brand: Vishay Siliconix
SKU: DG509BEQ-T1-E3
Price: 3.07000 USD
Availability: InStock

new-10%

DG509BEQ-T1-E3

Manufacturer part number:DG509BEQ-T1-E3

Manufacturer:Vishay Siliconix

Description:250ns, 240ns SP4T 380Ohm Analog Switches BREAK-BEFORE-MAKE DG509 16 Pins 1nA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:DG509BEQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	15 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2015
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	500Ohm
Terminal Finish	MATTE TIN
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DG509
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	44V
Min Supply Voltage	12V
Operating Supply Current	500μA
Element Configuration	Dual
Nominal Supply Current	10μA
Power Dissipation	450mW
Max Supply Current	-200μA
Propagation Delay	300 ns
Turn On Delay Time	300 ns
Logic Function	Multiplexer
Number of Inputs	8
Supply Type	Dual, Single
Bandwidth	250MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	380Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	81 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 8pF
On-state Resistance Match-Nom	10Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	250ns, 240ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-88dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	340ns
Signal Current-Max	0.03A
Voltage - Supply, Dual (V±)	±5V~20V
Height	430μm
Length	5.08mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG509BEQ-T1-E3 Product Details

DG509BEQ-T1-E3 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 4:1. Operating temperature around -40°C~125°C TA extended. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. A SP4T switching circuit is used for these analog switches. Circuits number 2 make up this analogue multiplexer. Try searching for DG509 variants of the analog switch ic. There is 500Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 44V. Dual, Single supply type digital switch with a low cost. 12V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 500μA current would be sufficient. When the digital multiplexer is charged above -200μA, damage can occur. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 5V should be attached. The electronic component can function from 15V. The 8 inputs need to be operated in order to work. A 250MHz-bandwidth can be used for data transfer.