ADG701LBRM Overview
The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. This electrical component is included in the 8 series of products. Based on SPST - NO switching circuits, these analog multiplexers work. Look for analog switch ic variants by searching with ADG701. Analog switches have 3Ohm internal resistance. To find out what the 8 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The lowest voltage fed to the electronic component should be 1.8V. This analogue multiplexer requires a voltage of 1.8V~5V when it drains from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
ADG701LBRM Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
ADG701LBRM Applications
There are a lot of Analog Devices Inc. ADG701LBRM Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Medical Instrumentation
- Industrial
- Private Branch Exchange (PBX)
- Automatic test equipment
- E1 Multiplexer
- New designs requiring multiplexer functions
- Fiber to the Home
- Precision instrumentation
- Audio and video signal routing
