Name: ADG712BRUZ
Brand: Hotenda
SKU: ADG712BRUZ
Price: 3.43000 USD
Availability: InStock

new-10%

ADG712BRUZ

Manufacturer part number:ADG712BRUZ

Manufacturer:Hotenda

Description:11ns, 6ns (Typ) SPST - NO 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG712 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG712BRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4Ohm
Additional Feature	CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	430mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG712
Pin Count	16
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	11 ns
Bandwidth	200MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	4Ohm
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	11ns, 6ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Switch-off Time-Max	12ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	2.5Ohm
Normal Position	NO
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG712BRUZ Product Details

ADG712BRUZ Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with ADG712. Analog switches have 4Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 5.5V. 1.8V is the lowest voltage the electrical component should receive. For this digital switch to work, 1nA current would suffice. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. This switch operates within the bandwidth of 200MHz. There is also CAN ALSO OPERATE WITH 5 V SUPPLY to look out for in this electronic part. There is 2.5Ohm resistance between Drain and Source for this electronic part.

ADG712BRUZ Features

4 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
Drain-to-Source resistance: 2.5Ohm