ADG658YCPZ Overview
Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there have been 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. There are 1 circuits in this switch device. If you are looking for variants of the digital switch, trying search with ADG658. This digital multiplexer has 75Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 12V in normal situations. 2V should be the lowest voltage fed to the electronic component. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. The voltage should be at least 2V if you are using dual power supplies. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. The electrical part can be operated at 5V voltage levels. Operating the 8 inputs requires 8 inputs. It is possible to transfer data over a 210MHz-bandwidth.
ADG658YCPZ Features
8 Channels
Bandwidth: 210MHz
ADG658YCPZ Applications
There are a lot of Analog Devices Inc. ADG658YCPZ Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- HDTV
- Microprocessor Controlled Analog Systems
- Precision data acquisition
- Automatic test equipment
- Public switching systems
- High-Voltage
- Data switching
- Digital Cross-Connects
- Digital cross connects (DSX-1)
