Name: MAX4583AUE+T
Brand: Maxim Integrated
SKU: MAX4583AUE+T
Price: 1.76000 USD
Availability: InStock

new-10%

MAX4583AUE+T

Manufacturer part number:MAX4583AUE+T

Manufacturer:Maxim Integrated

Description:200ns, 100ns SPDT 80Ohm Analog Switches BREAK-BEFORE-MAKE MAX4583 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:MAX4583AUE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	80Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	MAX4583
Pin Count	16
Operating Supply Voltage	6V
Number of Channels	1
Number of Circuits	3
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Max Supply Current	1μA
Turn On Delay Time	200 ns
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	80Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	4pF 6pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	200ns, 100ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-73dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.02A
Height Seated (Max)	1.1mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4583AUE+T Product Details

MAX4583AUE+T Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 16. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 3 circuits. Use MAX4583 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 80Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 12V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 1μA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. A dual power supply should have at least 2V voltage attached. A voltage of 6V can be used to operate the electronic component.