Name: ADG612YRUZ-REEL7
Brand: Hotenda
SKU: ADG612YRUZ-REEL7
Price: 5.65000 USD
Availability: InStock

new-10%

ADG612YRUZ-REEL7

Manufacturer part number:ADG612YRUZ-REEL7

Manufacturer:Hotenda

Description:65ns, 40ns SPST - NO 115Ohm Analog Switches BREAK-BEFORE-MAKE ADG612 16 Pins 100pA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG612YRUZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	115Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG612
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Operating Supply Current	1nA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	65 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.7V~5.5V
Supply Type	Dual, Single
Bandwidth	680MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
High Level Output Current	10mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	65ns, 40ns
Charge Injection	-0.5pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	260ns
Normal Position	NO
Signal Current-Max	0.01A
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG612YRUZ-REEL7 Product Details

ADG612YRUZ-REEL7 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~125°C TA. There are 16 terminations totally. By its 4 channels, the electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with ADG612. This digital multiplexer has 115Ohm internal resistance. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 2.7V. 1nA current would be enough for this multiplexer to operate. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5.5V. You should attach at least 2.7V voltage if you are using dual power supply. This switch operates within the bandwidth of 680MHz.