Name: MAX4852ETE+T
Brand: Maxim Integrated
SKU: MAX4852ETE+T
Price: 2.12000 USD
Availability: InStock

new-10%

MAX4852ETE+T

Manufacturer part number:MAX4852ETE+T

Manufacturer:Maxim Integrated

Description:60ns, 40ns SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4852 16 Pins 2nA 3V 16-WFQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX4852ETE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.667W
Technology	CMOS
Terminal Position	QUAD
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Base Part Number	MAX4852
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Turn On Delay Time	60 ns
Data Rate	12 Mbps
Supply Type	Single
Turn-Off Delay Time	40 ns
-3db Bandwidth	100MHz
On-State Resistance (Max)	4.5Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	20pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	60ns, 40ns
Charge Injection	8pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-95dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2V~5.5V
Height Seated (Max)	0.8mm
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4852ETE+T Product Details

MAX4852ETE+T Overview

The electronic component is convenient to ship overseas because it is packed in a 16-WFQFN Exposed Pad. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. As a result of its 1 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. Use MAX4852 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 4.5Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 1μA current. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. A voltage of 5V can be used to operate the electronic component.