ADG604YRUZ-REEL Overview
Due to its 14-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. In total, there are 14 terminations. By its 4 channels, the electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. An injection of 14 pins is performed into the body of the electrical component. Circuits based on SP4T switching are used to construct these analog switch ics. 1 circuits are used in this analogue multiplexer. Using the ADG604 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 115Ohm. Please refer to the datasheets for 14 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. 2.7V should be the lowest voltage fed to the electronic component. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5.5V. For dual power supplies, a voltage of at least 2.7V should be attached. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. The electrical component supports 4 inputs.
ADG604YRUZ-REEL Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 280MHz
ADG604YRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG604YRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Wireless Local Loop
- Channel Banks
- Video switching
- Remote wireless modules
- New designs requiring multiplexer functions
- Sample-and-hold systems
- Digital Cross-Connects
- Low-Voltage
- Precision instrumentation
