Name: MAX4534CSD+T
Brand: Maxim Integrated
SKU: MAX4534CSD+T
Availability: InStock

new-10%

MAX4534CSD+T

Manufacturer part number:MAX4534CSD+T

Manufacturer:Maxim Integrated

Description:275ns, 200ns SP4T 400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4534 14 Pins 500pA 15V 14-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX4534CSD+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	MAX4534
Pin Count	14
Qualification Status	Not Qualified
Number of Channels	4
Number of Circuits	1
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V
Supply Current-Max (Isup)	0.375mA
Neg Supply Voltage-Nom (Vsup)	-15V
On-State Resistance (Max)	400Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 6.5pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	275ns, 200ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-53dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	275ns
Switch-off Time-Max	200ns
Signal Current-Max	0.03A
Length	8.65mm
Width	3.9mm
RoHS Status	ROHS3 Compliant

MAX4534CSD+T Product Details

MAX4534CSD+T Overview

The electrical component comes in 14-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 4:1. Operation at a temperature around 0°C~70°C TA. Total terminations are 14. A electrical component with 4 channels is capable of high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 14 series. A SP4T switching circuit is used for these analog switches. There are 1 circuits in this multiplexer. Try searching with MAX4534 if you're looking for variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.