ADG601C-PT7 Overview
This electronic part is conveniently packaged in Die, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 14. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. An injection of 0 pins is performed into the body of the electrical component. A SPST - NO switching circuit is used to build these analog multiplexers. Use ADG601 to search for variants of the digital switches. There is 2Ohm internal resistance in this digital multiplexer. To find out what the functions of 0 pins are, please refer to their datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2.7V should be the lowest voltage fed to the electronic component. A voltage higher than 1μA may cause damage to the switch multiplexer. If put voltage greater than 5.5V on the multiplexer, damage may be caused to the device. The voltage should be at least 2.7V if you are using dual power supplies. The 1 inputs need to be operated in order to work. It is possible to transfer data over a 180MHz-bandwidth.
ADG601C-PT7 Features
1 Channels
Switch Circuit: SPST - NO
Bandwidth: 180MHz
ADG601C-PT7 Applications
There are a lot of Analog Devices Inc. ADG601C-PT7 Analog Switches & Multiplexers ICs applications.
- Industrial
- Communication systems
- E1 Multiplexer
- Routers
- Video switching
- Audio and video switching
- Intelligent PBX
- Cell phones
- Relay Replacement
- Modems
