Name: ADG601BRTZ-REEL
Brand: Hotenda
SKU: ADG601BRTZ-REEL
Price: 2.87000 USD
Availability: InStock

new-10%

ADG601BRTZ-REEL

Manufacturer part number:ADG601BRTZ-REEL

Manufacturer:Hotenda

Description:120ns, 75ns SPST - NO 2.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG601 6 Pins 250pA 5V SOT-23-6

Case Package:SOT-23

Datasheet:ADG601BRTZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Surface Mount	YES
Number of Pins	6
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	2.5Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.95mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG601
Pin Count	6
Qualification Status	Not Qualified
Number of Channels	1
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.7V~5.5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	2.7V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	50pF 50pF
On-state Resistance Match-Nom	0.35Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	120ns, 75ns
Charge Injection	250pC
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Length	2.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG601BRTZ-REEL Product Details

ADG601BRTZ-REEL Overview

Shipping overseas is convenient with the electronic component packed in SOT-23-6. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is part of the design of the 6 series that this electronic component is included. A SPST - NO switching circuit is used to build these analog multiplexers. ADG601 can be used to search for analog multiplexer variants. An switch multiplexer with 2.5Ohm internal resistance has a value of 2.5Ohm. For functions related to 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. Putting voltage greater than 1μA on the multiplexer may cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.5V. If you are using dual power supplies, you should attach at least 2.7V. In 180MHz-bandwidths, data can be transferred. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY.