Name: ADG1401BCPZ-REEL7
Brand: Hotenda
SKU: ADG1401BCPZ-REEL7
Price: 4.58000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	8-WFDFN Exposed Pad, CSP
Number of Pins	8
Supplier Device Package	8-LFCSP-WD (2x3)
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	1.3Ohm
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Max Power Dissipation	1.44mW
Base Part Number	ADG1401
Number of Outputs	1
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	1.44mW
Max Supply Current	95μA
Turn On Delay Time	150 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	120MHz
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	16.5V
-3db Bandwidth	120MHz
On-State Resistance (Max)	1.3Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	400pA
Channel Capacitance (CS(off), CD(off))	36pF 41pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Insertion Loss (dB)	0.08 dB
Charge Injection	-12pC
Channel-to-Channel Matching (ΔRon)	200mOhm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1401BCPZ-REEL7 Product Details

ADG1401BCPZ-REEL7 Overview

Presented in 8-WFDFN Exposed Pad, CSP, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~125°C TA. A high-quality output is provided by the electrical component's 1 channels. A SPST - NO switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 1. Using the ADG1401 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 1.3Ohm. For details about the functions of 8 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 5V is the lowest voltage the electrical component should receive. Putting voltage greater than 95μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 16.5V. With dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 12V voltage levels. The 1 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 120MHz bandwidths. An environment with a temperature greater than 125°C should not be used to operate the digital switches. In this digital multiplexer, there are 1 outputs. There is a 8-LFCSP-WD (2x3) package available from suppliers.