Name: ADG601BRMZ
Brand: Hotenda
SKU: ADG601BRMZ
Price: 2.95000 USD
Availability: InStock

new-10%

ADG601BRMZ

Manufacturer part number:ADG601BRMZ

Manufacturer:Hotenda

Description:120ns, 75ns SPST - NO 2.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG601 8 Pins 250pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG601BRMZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	2.5Ohm
Additional Feature	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG601
Pin Count	8
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.7V~5.5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	2.7V
High Level Output Current	100mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	50pF 50pF
On-state Resistance Match-Nom	0.35Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	120ns, 75ns
Charge Injection	250pC
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG601BRMZ Product Details

ADG601BRMZ Overview

Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -40°C~85°C TA extended. In total, there are 8 terminations. The electronic part provides high-quality output because it has 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. There is an electrical component included in the 8 series. Unlike digital switches, these are based on SPST - NO switching circuits. Using the ADG601 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 2.5Ohm. For functions related to 8 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. An operating current of 1nA would be sufficient for this switch device. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 5.5VWhen using dual power supplies, you should attach at least 2.7V. There are 180MHz bandwidths for data transfer. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY.