Name: MAX4603CWE+T
Brand: Maxim Integrated
SKU: MAX4603CWE+T
Price: 5.91000 USD
Availability: InStock

new-10%

MAX4603CWE+T

Manufacturer part number:MAX4603CWE+T

Manufacturer:Maxim Integrated

Description:250ns, 350ns SPST - NO/NC 2.5Ohm Analog Switches MAX4603 16 Pins 500pA 15V 16-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:MAX4603CWE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	1999
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	2.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	762mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Base Part Number	MAX4603
Output	SEPARATE OUTPUT
Pin Count	16
JESD-30 Code	R-PDSO-G16
Operating Supply Voltage	20V
Power Supplies	12/+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Nominal Supply Current	5μA
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	350 ns
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	56 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	55pF 55pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	250ns, 350ns
Charge Injection	120pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-59dB @ 1MHz
Height Seated (Max)	2.65mm
Length	10.3mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4603CWE+T Product Details

MAX4603CWE+T Overview

As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around 0°C~70°C TA extended. Total terminations are 16. A 1 channel electronic part produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 16 series. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. There are 4 circuits in this switch device. Using the MAX4603 search parameter, you can discover variants of the switch. Analog switches have 2.5Ohm internal resistance. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 4.5V. It may damage the digital multiplexer if the voltage is higher than 500nA. Despite this switch's dual supply capability, its voltage should not exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. There is a voltage range of 20V operating voltages for the electrical part.