ADG5421BRMZ Overview
Due to its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature extended to -40°C~125°C TA. Total terminations are 10. A electrical component with 1 channels is capable of high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 10 series. Multiplexers built on a SPST - NO switching circuit are built. Look for analog switch ic variants by searching with ADG5421. Analog switches have 14Ohm internal resistance. You can find the functions of the 10 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 40V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 9V. Put voltage above 55μA on the multiplexer to cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. In the case of dual power supplies, you should connect at least 9V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating 2 inputs is required.
ADG5421BRMZ Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 250MHz
ADG5421BRMZ Applications
There are a lot of Analog Devices Inc. ADG5421BRMZ Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Digital access cross connects
- Fiber In The Loop (FITL)
- Communication systems
- PDAs
- Relay Replacement
- HDTV
- High reliability control systems
- ISDN NT1/TA
- CSU
