ADG5419BRMZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, 8 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. As part of its design, the 8 series is equipped with this electronic component. Unlike digital switches, these are based on SPDT switching circuits. The circuits in this analogue multiplexer number 1. If you are looking for variants of the digital switch, trying search with ADG5419. In this multiplexer, the internal resistance is 14Ohm. You can find the functions of the 8 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 40V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 9V. If put voltage greater than 55μA on the device, damage may be caused to the analogue multiplexer. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. You should attach at least 9V voltage if you are using dual power supply.
ADG5419BRMZ Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 190MHz
ADG5419BRMZ Applications
There are a lot of Analog Devices Inc. ADG5419BRMZ Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- 65 V DACs
- USB 1.1 signal switching circuits
- Cross Connects
- Data switching
- Low-Voltage
- Imaging
- Relay Replacement
- DVD-R
- Microprocessor Controlled Analog Systems
