Name: ADG5409BRUZ
Brand: Hotenda
SKU: ADG5409BRUZ
Price: 7.11000 USD
Availability: InStock

new-10%

ADG5409BRUZ

Manufacturer part number:ADG5409BRUZ

Manufacturer:Hotenda

Description:165ns, 153ns SP4T 14Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG5409 16 Pins 250pA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG5409BRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	16 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	14Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.9mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5409
Pin Count	16
Number of Channels	1
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	40V
Min Supply Voltage	9V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	100μA
Power Dissipation	2.9mW
Max Supply Current	80pA
Turn On Delay Time	218 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Bandwidth	88MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	189 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	14Ohm
Min Dual Supply Voltage	9V
High Level Output Current	75mA
Dual Supply Voltage	20V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	17pF 48pF
On-state Resistance Match-Nom	0.8Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	165ns, 153ns
Charge Injection	155pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	22Ohm
Signal Current-Max	0.03A
Height	1.2mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5409BRUZ Product Details

ADG5409BRUZ Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Try searching with ADG5409 to find analog multiplexer variants. An switch multiplexer with 14Ohm internal resistance has a value of 14Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 40V in normal situations. The lowest voltage the electronic part should receive is 9V. When the digital multiplexer is charged above 80pA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 9V to your dual power supply. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. Operating the 8 inputs requires 8 inputs. There are 88MHz bandwidths for data transfer. It has a Drain to Source resistance of 22Ohm ohms.