Name: ADG5236BRUZ
Brand: Hotenda
SKU: ADG5236BRUZ
Price: 6.66000 USD
Availability: InStock

new-10%

ADG5236BRUZ

Manufacturer part number:ADG5236BRUZ

Manufacturer:Hotenda

Description:190ns, 180ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5236 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG5236BRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	160Ohm
Subcategory	Multiplexers or Switches
Max Power Dissipation	1.1mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG5236
Pin Count	16
Number of Outputs	4
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Power Dissipation	1.1mW
Max Supply Current	55μA
Turn On Delay Time	215 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	266MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	185 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.5pF 12pF
On-state Resistance Match-Nom	1.4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	190ns, 180ns
Insertion Loss (dB)	-0.7 dB
Charge Injection	-0.6pC
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	300ns
Height	1.05mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5236BRUZ Product Details

ADG5236BRUZ Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -40°C~125°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. If you are looking for variants of the digital switch, trying search with ADG5236. Analog switches have 160Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexers or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 40V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 9V as the lowest voltage for the electrical part. It may damage the digital multiplexer if the voltage is higher than 55μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. A dual power supply should have at least 9V voltage attached. Operating 2 inputs is required. A 266MHz-bandwidth can be used for data transfer. 4 outputs are included in the analogue multiplexer.