Name: ADG452BRZ
Brand: Hotenda
SKU: ADG452BRZ
Price: 7.01000 USD
Availability: InStock

new-10%

ADG452BRZ

Manufacturer part number:ADG452BRZ

Manufacturer:Hotenda

Description:180ns, 140ns SPST - NO 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG452 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG452BRZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5Ohm
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG452
Pin Count	16
Operating Supply Voltage	9V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	5V
Power Dissipation	17.5μW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	180 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	5Ohm
Min Dual Supply Voltage	5V
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Neg Supply Voltage-Max (Vsup)	-20V
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	37pF 37pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	180ns, 140ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Drain to Source Resistance	4Ohm
Normal Position	NO
Voltage - Supply, Dual (V±)	±4.5V~20V
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG452BRZ Product Details

ADG452BRZ Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 4 channels. With a 5V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. The analog switch ics are built using SPST - NO switching circuits. Try searching with ADG452 to find analog multiplexer variants. There is 5Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 5V. The analogue multiplexer may be damaged if voltage is greater than 500nA. For this switch, a dual supply voltage is feasible, but it must not exceed 15VWhen using dual power supplies, you should attach at least 5V. 9V operating voltages can be used with this electrical part. This electronic part has additional features, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY. Resistivity from Drain to Source is 4Ohm for this electronic part.