ADG441BNZ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. A 15V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. Look for analog switch ic variants by searching with ADG441. Internally, this switch multiplexer has a resistance of 70Ohm. The functions of 16 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage fed to the electronic component should be 10.8V. A digital multiplexer may suffer damage if voltage is applied above 80μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. If you are using dual power supplies, you should attach at least 13.5V. Operating voltages of 12V are compatible with the electrical part.
ADG441BNZ Features
4 Channels
Switch Circuit: SPST - NC
ADG441BNZ Applications
There are a lot of Analog Devices Inc. ADG441BNZ Analog Switches & Multiplexers ICs applications.
- Cable PC
- Medical systems
- Data switching
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Access Concentrators
- Ultrasound
- Industrial control systems
- Sample hold systems
- Channelized and Unchannelized DS3 applications
- Audio signal routing
