Name: TS12A4516D
Brand: Texas Instruments
SKU: TS12A4516D
Price: 1.39000 USD
Availability: InStock

new-10%

TS12A4516D

Manufacturer part number:TS12A4516D

Manufacturer:Texas Instruments

Description:75ns, 45ns SPST - NO 20Ohm Analog Switches BREAK-BEFORE-MAKE TS12A4516 8 Pins 5nA 1.8V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:TS12A4516D Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	20Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS12A4516
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	1
Max Supply Voltage	6V
Min Supply Voltage	1V
Operating Supply Current	70μA
Power Dissipation	471mW
Max Supply Current	70μA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Number of Inputs	1
Supply Type	Dual
Bandwidth	464MHz
Neg Supply Voltage-Nom (Vsup)	-1.8V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	20Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	83 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	5.5pF 5.5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	-13pC
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±1V~6V
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS12A4516D Product Details

TS12A4516D Overview

The electrical component comes in 8-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 8. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A key feature of the 8 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Look for analog switch ic variants by searching with TS12A4516. Analog switches have 20Ohm internal resistance. For functions related to 8 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 6V. Analog switch ics with Dual supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1V. 70μA current would be enough for this multiplexer to operate. If you put voltage higher than 70μA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. In the case of dual power supplies, you should connect at least 1V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. In order to operate the 1 inputs, there are several steps to follow. This switch operates within the bandwidth of 464MHz. Additional features of the electronic component include: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V.