Name: ADG433BR
Brand: Hotenda
SKU: ADG433BR
Price: 3.56000 USD
Availability: InStock

new-10%

ADG433BR

Manufacturer part number:ADG433BR

Manufacturer:Hotenda

Description:90ns, 60ns SPST - NO/NC 24Ohm Analog Switches BREAK-BEFORE-MAKE ADG433 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG433BR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	24Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	7.7μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	ADG433
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Min Supply Voltage	5V
Power Dissipation	3.5μW
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	165 ns
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	24Ohm
Min Dual Supply Voltage	13.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.85Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	90ns, 60ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1.2 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG433BR Product Details

ADG433BR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. The analog switch ics are built using SPST - NO/NC switching circuits. Search with ADG433 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 24Ohm. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 25V. Digital switch that provides Dual, Single power at a cost-effective price. 5V is the lowest voltage the electrical component should receive. A voltage higher than 100nA may cause damage to the switch multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. When using dual power supplies, you should attach at least 13.5V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electronic component can function from 12V.