Name: ADG1421BRMZ-REEL7
Brand: Hotenda
SKU: ADG1421BRMZ-REEL7
Price: 5.48000 USD
Availability: InStock

new-10%

ADG1421BRMZ-REEL7

Manufacturer part number:ADG1421BRMZ-REEL7

Manufacturer:Hotenda

Description:145ns, 145ns SPST - NO 2.4Ohm Analog Switches BREAK-BEFORE-MAKE ADG1421 10 Pins 500pA 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG1421BRMZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	2.4Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1421
Pin Count	10
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	120μA
Power Dissipation	1.8mW
Max Supply Current	190μA
Throw Configuration	SPST
Turn On Delay Time	145 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	2.4Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	18pF 22pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	145ns, 145ns
Insertion Loss (dB)	0.12 dB
Charge Injection	-5pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-74dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	395ns
Normal Position	NO
Height Seated (Max)	1.1mm
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1421BRMZ-REEL7 Product Details

ADG1421BRMZ-REEL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 10. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 10 pins are injected into the body of the electronic part. Based on SPST - NO switching circuits, these analog multiplexers work. Use ADG1421 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 2.4Ohm. Datasheets for functions of 10 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 5V should be applied to the electronic component. This multiplexer would work with 120μA current. If you put voltage higher than 190μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. A voltage of 12V can be used to operate the electronic component. A 2 input needs to be operated. There are various bandwidths available for data transfer.