Name: ADG333ABR
Brand: Hotenda
SKU: ADG333ABR
Availability: InStock

new-10%

ADG333ABR

Manufacturer part number:ADG333ABR

Manufacturer:Hotenda

Description:90ns, 80ns (Typ) SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE ADG333 20 Pins 250pA 15V 20-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:ADG333ABR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	45Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	3.77mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	20
Base Part Number	ADG333
Pin Count	20
Number of Outputs	8
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	30V
Min Supply Voltage	3V
Test Frequency	1MHz
Operating Supply Current	50μA
Power Dissipation	3.77mW
Max Supply Current	250μA
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	3V~30V ±3V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	3V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	7pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	90ns, 80ns (Typ)
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height	2.35mm
Length	13mm
Width	7.6mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG333ABR Product Details

ADG333ABR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-SOIC (0.295, 7.50mm Width). To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. Total terminations are 20. Due to its 4 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. The electronic part body is injected with 20 pins. Unlike digital switches, these are based on SPDT switching circuits. Use ADG333 to search for variants of the digital switches. As far as internal resistance is concerned, it has 45Ohm. The functions of 20 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 3V is the lowest voltage the electrical component should receive. This multiplexer would work with 50μA current. Putting voltage greater than 250μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. When using dual power supplies, you should attach at least 3V. This electrical part is compatible with 12V operating voltages. The analogue multiplexer has 8 outputs.