Name: ADG428BP-REEL
Brand: Hotenda
SKU: ADG428BP-REEL
Availability: InStock

new-10%

ADG428BP-REEL

Manufacturer part number:ADG428BP-REEL

Manufacturer:Hotenda

Description:150ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG428 20 Pins 500pA 15V 20-LCC (J-Lead)

Case Package:SOT-23

Datasheet:ADG428BP-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	100Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	15V
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG428
Pin Count	20
Qualification Status	Not Qualified
Number of Channels	8
Number of Circuits	1
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Power Dissipation	800mW
Throw Configuration	DPST
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	12V ±15V
Neg Supply Voltage-Nom (Vsup)	-15V
Max Dual Supply Voltage	22V
On-State Resistance (Max)	100Ohm
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	11pF 40pF
On-state Resistance Match-Nom	10Ohm
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	225ns
Switch-off Time-Max	300ns
Signal Current-Max	0.03A
Height Seated (Max)	4.57mm
RoHS Status	Non-RoHS Compliant

ADG428BP-REEL Product Details

ADG428BP-REEL Overview

The electrical component comes in 20-LCC (J-Lead) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, there have been 20 terminations. The electronic part delivers high-quality output through its 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. 20 pins are injected to the electronic part body. The circuits in this analogue multiplexer number 1. Search with ADG428 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. To find out what the 20 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. There is no problem with using dual supply voltage, but it should not exceed 22V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. There are 8 inputs to be operated.