Name: ADG333ABNZ
Brand: Hotenda
SKU: ADG333ABNZ
Price: 9.31000 USD
Availability: InStock

new

ADG333ABNZ

Manufacturer part number:ADG333ABNZ

Manufacturer:Hotenda

Description:90ns, 80ns (Typ) SPDT 45Ohm Analog Switches ADG333 20 Pins 250pA 15V 20-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:ADG333ABNZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Through Hole
Package / Case	20-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	45Ohm
Max Power Dissipation	3.77mW
Technology	BICMOS
Number of Functions	4
Supply Voltage	15V
Base Part Number	ADG333
Pin Count	20
Number of Outputs	8
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	30V
Min Supply Voltage	3V
Test Frequency	1MHz
Power Dissipation	3.77mW
Max Supply Current	250μA
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	3V~30V ±3V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	3V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	7pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	90ns, 80ns (Typ)
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-85dB @ 1MHz
Drain to Source Resistance	20mOhm
Height	3.3mm
Length	26.16mm
Width	6.35mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG333ABNZ Product Details

ADG333ABNZ Overview

Shipping overseas is convenient due to the electrical component's packing in 20-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. 20 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 20 pins. Multiplexers built on a SPDT switching circuit are built. Try searching for the analog switch ic with ADG333 if you are looking for variants. As far as internal resistance is concerned, it has 45Ohm. To find out what the functions of 20 pins are, please refer to their datasheets. Users shouldn't supply more than 30V voltage to the switch device. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 3V. Put voltage above 250μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 3V. Operating voltages range from 12V. There is 20mOhm resistance between Drain and Source for this electronic part. An output of 8 is provided by the digital multiplexer.