Name: ADG734BRUZ-REEL7
Brand: Hotenda
SKU: ADG734BRUZ-REEL7
Price: 4.63000 USD
Availability: InStock

new-10%

ADG734BRUZ-REEL7

Manufacturer part number:ADG734BRUZ-REEL7

Manufacturer:Hotenda

Description:21ns, 10ns (Typ) SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG734 20 Pins 100pA 2.5V 20-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG734BRUZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG734
Pin Count	20
Number of Outputs	8
Polarity	Non-Inverting
Power Supplies	3/5/+-3V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Turn On Delay Time	34 ns
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	12 ns
Max Dual Supply Voltage	2.75V
-3db Bandwidth	200MHz
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
High Level Output Current	30mA
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	21ns, 10ns (Typ)
Charge Injection	5pC
Crosstalk	-67dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	35ns
Switch-off Time-Max	16ns
Drain to Source Resistance	4.5Ohm
Height Seated (Max)	1.2mm
Length	6.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG734BRUZ-REEL7 Product Details

ADG734BRUZ-REEL7 Overview

Packed in 20-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:1. The operating temperature is extended to around -40°C~85°C TA. 20 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. As part of the design of the 20 series, this electronic part has been incorporated into the system. SPDT switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with ADG734. An switch multiplexer with 4.5Ohm internal resistance has a value of 4.5Ohm. Datasheets for functions of 20 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. 1.8V should be the lowest voltage fed to the electronic component. Putting voltage greater than 1μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 2.75V. If you are using a dual power supply, you should attach at least 2.25V. 160MHz bandwidths enable data to be transferred. There is 4.5Ohm resistance between the Drain and Source on this part. This digital multiplexer has 8 outputs.