ADG202AKRZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Search with ADG202 if you are looking for analog multiplexer variants. It has an internal resistance of 90Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 25V volts for the multiplexer. Dual supply type digital switch with a low cost. In order to operate this switch device, it would need a current of 600μA. A digital multiplexer may suffer damage if voltage is applied above 2mA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. There is a voltage range of 15V operating voltages for the electrical part.
ADG202AKRZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NO
600μA Supply Current
ADG202AKRZ-REEL7 Applications
There are a lot of Analog Devices Inc.
ADG202AKRZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
