Name: 74HCT4052DB,112
Brand: Nexperia USA Inc.
SKU: 74HCT4052DB,112
Price: 0.33000 USD
Availability: InStock

new-10%

74HCT4052DB,112

Manufacturer part number:74HCT4052DB,112

Manufacturer:Nexperia USA Inc.

Description:60ns, 48ns SP4T 150Ohm Analog Switches 74HCT4052 16 Pins 2μA 4.5V 16-SSOP (0.209, 5.30mm Width)

Case Package:SOT-23

Datasheet:74HCT4052DB,112 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	13 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
Published	2010
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	210Ohm
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HCT4052
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	320μA
Power Dissipation	500mW
Propagation Delay	18 ns
Turn On Delay Time	105 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	150Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	2.5V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Number of Input Lines	13
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 48ns
Number of Output Lines	10
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Switch-off Time-Max	57ns
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74HCT4052DB,112 Product Details

74HCT4052DB,112 Overview

This electronic part is conveniently packaged in 16-SSOP (0.209, 5.30mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 16 terminations. A 8 channel electronic part produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SP4T switching circuits. 2 circuits are used in this analogue multiplexer. Try searching for 74HCT4052 variants of the analog switch ic. Analog switches have 210Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 4.5V voltage fed to the electrical part below 4.5V. It would be sufficient to run this analogue multiplexer with 320μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. The voltage should be at least 1V if you are using dual power supplies. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. Operating voltages of 5V are compatible with the electrical part. In 180MHz-bandwidths, data can be transferred.