Name: ADG1612BCPZ-REEL7
Brand: Hotenda
SKU: ADG1612BCPZ-REEL7
Price: 5.56000 USD
Availability: InStock

new-10%

ADG1612BCPZ-REEL7

Manufacturer part number:ADG1612BCPZ-REEL7

Manufacturer:Hotenda

Description:156ns, 87ns SPST - NO 1.1Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1612 16 Pins 300pA 5V 16-VQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1612BCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.2Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.8mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG1612
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	3.3/12/+-5V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16V
Min Supply Voltage	3.3V
Test Frequency	1MHz
Power Dissipation	5.8mW
Max Supply Current	480μA
Turn On Delay Time	212 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3.3V~16V ±3.3V~8V
Supply Type	Dual, Single
Bandwidth	38MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	137 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	1.1Ohm
Min Dual Supply Voltage	3.3V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	60pF 60pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	156ns, 87ns
Charge Injection	170pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-110dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	285ns
Switch-off Time-Max	159ns
Normal Position	NC
Height Seated (Max)	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1612BCPZ-REEL7 Product Details

ADG1612BCPZ-REEL7 Overview

Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Increasing operating temperature to around -40°C~125°C TA. There are 16 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. SPST - NO switching circuits are used in these analog switch ics. Try searching for the analog switch ic with ADG1612 if you are looking for variants. The internal resistance of this digital multiplexer is 1.2Ohm. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 16V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 3.3V. The analogue multiplexer may be damaged if voltage is greater than 480μA. Despite this switch's dual supply capability, its voltage should not exceed 8V. When using dual power supplies, you should attach at least 3.3V. This analog switch ic utilizes SEPARATE OUTPUT output. Among the inputs that can be operated are the 4 inputs. The transfer of data can be performed over 38MHz bandwidths.