SN74LVC1G66YEAR Overview
Shipping overseas is convenient due to the electrical component's packing in 5-XFBGA, DSBGA. High reliability is ensured by the advanced packaging method Cut Tape (CT). Surface Mount is where this multiplexer is located. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 5 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. A 2.3V voltage supply should turn on and run the electronic component. An injection of 5 pins is performed into the body of the electrical component. The analog switch ics are built using SPST - NO switching circuits. Circuits number 1 make up this analogue multiplexer. Try searching with 74LVC1G66 to find analog multiplexer variants. It has an internal resistance of 10Ohm. To find out what the 5 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 1.65V. 10μA current would be enough for this multiplexer to operate. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 10μA.
SN74LVC1G66YEAR Features
1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
SN74LVC1G66YEAR Applications
There are a lot of Texas Instruments SN74LVC1G66YEAR Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Cellular phones
- Cell phones
- Precision instrumentation
- ISDN NT1/TA
- Multiplexers
- Ultrasound
- PBXs
- Public switching systems
- High reliability control systems
