Name: ADG1434YCPZ-REEL7
Brand: Hotenda
SKU: ADG1434YCPZ-REEL7
Price: 9.44000 USD
Availability: InStock

new

ADG1434YCPZ-REEL7

Manufacturer part number:ADG1434YCPZ-REEL7

Manufacturer:Hotenda

Description:170ns, 75ns SPDT 4.7Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1434 20 Pins 300pA 5V 20-WFQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1434YCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	26 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.6mW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG1434
Pin Count	20
Number of Outputs	8
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	6.6mW
Max Supply Current	475μA
Turn On Delay Time	170 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	12pF 22pF
On-state Resistance Match-Nom	0.55Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	170ns, 75ns
Insertion Loss (dB)	0.24 dB
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Max Junction Temperature (Tj)	150°C
Drain to Source Resistance	4.7Ohm
On-State Resistance	4.7Ohm
Height	800μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1434YCPZ-REEL7 Product Details

ADG1434YCPZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-WFQFN Exposed Pad, CSP. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature around -40°C~125°C TA extended. The total number of terminations is 20. As a result of its 4 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 20 series. These analog multiplexers are built based on SPDT switching circuits. Search with ADG1434 if you are looking for analog multiplexer variants. Analog switches have 4.7Ohm internal resistance. You can find the functions of the 20 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 16.5V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 5V. Put voltage above 475μA on the multiplexer to cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. With dual power supplies, you should attach at least 4.5V. There is a voltage range of 12V operating voltages for the electrical part. In order to operate the 4 inputs, there are several steps to follow. It is possible to transfer data over a 200MHz-bandwidth. The Drain to Source resistance of this electronic component is 4.7Ohm. The analogue multiplexer has 8 outputs.