Name: ADG1414BCPZ-REEL7
Brand: Hotenda
SKU: ADG1414BCPZ-REEL7
Price: 8.96000 USD
Availability: InStock

new

ADG1414BCPZ-REEL7

Manufacturer part number:ADG1414BCPZ-REEL7

Manufacturer:Hotenda

Description:93ns, 35ns SPST - NO 11.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1414 24 Pins 150pA 5V 24-WFQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1414BCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	16 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	24-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	24
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	24
ECCN Code	EAR99
Resistance	11.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.8mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	8
Supply Voltage	5V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG1414
Pin Count	24
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	4.5V
Test Frequency	1MHz
Power Dissipation	2.8mW
Max Supply Current	1μA
Turn On Delay Time	93 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	12V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	256MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	11.5Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	150pA
Channel Capacitance (CS(off), CD(off))	8pF
On-state Resistance Match-Nom	0.6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	93ns, 35ns
Insertion Loss (dB)	0.55 dB
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	550m Ω
Crosstalk	-75dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	320ns
Switch-off Time-Max	70ns
Normal Position	NO
Height Seated (Max)	1mm
Length	4mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1414BCPZ-REEL7 Product Details

ADG1414BCPZ-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 24-WFQFN Exposed Pad, CSP. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. In total, there have been 24 terminations. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. As part of the design of the 24 series, this electronic part has been incorporated into the system. Based on SPST - NO switching circuits, these analog multiplexers work. ADG1414 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 11.5Ohm. The datasheets for the 24 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 4.5V. When the digital multiplexer is charged above 1μA, damage can occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. The voltage should be at least 4.5V if you are using dual power supplies. There is a voltage range of 12V operating voltages for the electrical part. Operating 8 inputs is required. There are 256MHz bandwidths for data transfer.