Name: ADG779BKSZ-R2
Brand: Hotenda
SKU: ADG779BKSZ-R2
Price: 2.75000 USD
Availability: InStock

new-10%

ADG779BKSZ-R2

Manufacturer part number:ADG779BKSZ-R2

Manufacturer:Hotenda

Description:14ns, 3ns (Typ) SPDT 5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG779 6 Pins 10pA Typ 3V 6-TSSOP, SC-88, SOT-363

Case Package:SOT-23

Datasheet:ADG779BKSZ-R2 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Surface Mount	YES
Number of Pins	6
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	5Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG779
Pin Count	6
Number of Outputs	2
Qualification Status	Not Qualified
Power Supplies	3/5V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Turn On Delay Time	14 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	3 ns
On-State Resistance (Max)	5Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	10pA Typ
Channel Capacitance (CS(off), CD(off))	7pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	14ns, 3ns (Typ)
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-82dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	5Ohm
Height	1mm
Length	2.2mm
Width	1.35mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG779BKSZ-R2 Product Details

ADG779BKSZ-R2 Overview

The electronic component is convenient to ship overseas because it is packed in a 6-TSSOP, SC-88, SOT-363. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. 6 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. Into the electrical component body are injected 6 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching with ADG779 to find analog multiplexer variants. An switch multiplexer with 5Ohm internal resistance has a value of 5Ohm. Datasheets for functions of 6 pins are available. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. 1.8V is the lowest voltage the electrical component should receive. This multiplexer would work with 1nA current. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to operate 1 inputs. The transfer of data can be performed over 200MHz bandwidths. It has a Drain to Source resistance of 5Ohm ohms. The analogue multiplexer has 2 outputs.