Name: ADG1413YCPZ-REEL7
Brand: Hotenda
SKU: ADG1413YCPZ-REEL7
Price: 7.59000 USD
Availability: InStock

new

ADG1413YCPZ-REEL7

Manufacturer part number:ADG1413YCPZ-REEL7

Manufacturer:Hotenda

Description:150ns, 120ns SPST - NO/NC 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1413 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1413YCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	26 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.8Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.97mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG1413
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	4.97mW
Max Supply Current	380μA
Turn On Delay Time	150 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	170MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.8Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	550pA
Channel Capacitance (CS(off), CD(off))	23pF 23pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	150ns, 120ns
Insertion Loss (dB)	-0.35 dB
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	510ns
Switch-off Time-Max	380ns
Height Seated (Max)	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1413YCPZ-REEL7 Product Details

ADG1413YCPZ-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 16-VQFN Exposed Pad, CSP. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. There are 16 pins injected into the electronic part body. Multiplexers built on a SPST - NO/NC switching circuit are built. Try searching with ADG1413 if you're looking for variants. As far as internal resistance is concerned, it has 1.8Ohm. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. 5V should be the lowest voltage fed to the electronic component. If you put voltage higher than 380μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. It can operate from 12V operating voltages. The electrical component supports 4 inputs. The data can be transferred over a wide range of bandwidths, called 170MHz bandwidths.