ADG1208YRUZ Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 8:1. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. A total of 1 circuits make up this switch device. Try searching with ADG1208 if you're looking for variants. In this multiplexer, the internal resistance is 200Ohm. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 16.5V to a switch device. The lowest voltage the electronic part should receive is 5V. There is no problem with using dual supply voltage, but it should not exceed 16.5V. For dual power supplies, a voltage of at least 5V should be attached. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages of 12V are compatible with the electrical part. The 8 inputs need to be operated in order to work. The transfer of data can be performed over 550MHz bandwidths. This electronic component presents a Drain to Source resistance of 200Ohm.
ADG1208YRUZ Features
8 Channels
Bandwidth: 550MHz
Drain-to-Source resistance: 200Ohm
ADG1208YRUZ Applications
There are a lot of Analog Devices Inc. ADG1208YRUZ Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Avionics and Military Systems
- Low-Voltage
- ATM
- Digital Cross-Connects
- Data Acquisition Systems
- Imaging
- High speed data transmission line cards
- High reliability control systems
- Multi-Line E1 Interface Cards
