Name: ADG1212YCPZ-500RL7
Brand: Hotenda
SKU: ADG1212YCPZ-500RL7
Price: 6.18000 USD
Availability: InStock

new-10%

ADG1212YCPZ-500RL7

Manufacturer part number:ADG1212YCPZ-500RL7

Manufacturer:Hotenda

Description:130ns, 115ns SPST - NO 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1212 16 Pins 100pA 15V 16-WFQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1212YCPZ-500RL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	150μW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1212
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Nominal Supply Current	320μA
Power Dissipation	150μW
Max Supply Current	380μA
Throw Configuration	SPST
Turn On Delay Time	130 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	700MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	115 ns
Max Dual Supply Voltage	16.5V
-3db Bandwidth	1GHz
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.1pF 1.2pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	130ns, 115ns
Charge Injection	-0.3pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	125ns
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1212YCPZ-500RL7 Product Details

ADG1212YCPZ-500RL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-WFQFN Exposed Pad, CSP. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPST - NO switching circuits. ADG1212 can be used to search for analog multiplexer variants. A 190Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 16.5V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. 5V is the lowest voltage the electrical component should receive. The analogue multiplexer may be damaged if voltage is greater than 380μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. There are SEPARATE OUTPUT outputs on this analog switch ic. This electrical part is compatible with 12V operating voltages. This switch operates within the bandwidth of 700MHz.