ADA4000-1ARZ-R7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. A J-FET-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 1.7mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 1.65mA. There should be no change in the voltage gain at 114dB. During the manufacturing process, this buffer amplifier is divided into 1 circuits. There are 1 channels on the operational amplifiers. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. There is a recommendation that this electrical part be used with a supply with 1.35mA current rating. With regard tp supply voltage, op amp is used under 36V. As a rule of thumb, the supply voltage of the op amp should not be lower than 8V. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V. Currently, linear amplifier is operating with a quiescent current of 1.65mA. In total, there are 1 op amps on the device.
ADA4000-1ARZ-R7 Features
114dB voltage gain
ADA4000-1ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4000-1ARZ-R7 Instrumentational OP Amps applications.
- E-book readers
- Multiplication circuits
- Signal filtering
- Video data acquisition
- pH (acidity)
- Exponential operation circuits
- Comparator
- Video amplifiers
- Signal transformation
- Mobile phone
